GREASE
BESTOLIFE STINGER HDD ALL SEASON
STINGER® HDD-ALL SEASON is a copper-based drilling compound for use in all HDD drilling applications. It is especially effective in lower temperature environments but has the versatility to be used year-round. STINGER® HDD-ALL SEASON is designed to provide galling and seizing protection and support for high bearing stress on HDD pipe joints. NSF H2 Registered.
Recommended for use on HDD drill pipe and developed for rugged conditions. Low temperature field application is enhanced through the use of a premium quality, low temperature base grease, making it an outstanding choice for environments reaching below 0ºF. Can be brushed on threads or applied via most automated lubrication systems.
Finely powdered copper, graphite and special non-metallic additives absorb stresses and enhance performance properties.
Resistant to wash-out and will not harden or bleed excessively in storage.
All Season formula allows for easier application in lower temperatures.
Superb protection against seizing and galling.
- Color: Copper
- Penetration: 295-325 (ASTM D217)
- NLGI Grade: 1
- Weight/Gallon: 10.2 pounds/gallon
- Thickener: Calcium
- Fluid Type: Petroleum
- Dropping Point: ≥300°F (≥149°C) (ATSM D2265)
- Flash Point: ≥325°F (≥162.8°C)
- Service Rating: 400°F (204°C)
- Friction Factor: 1.0*
- Shelf Life: 4 years (unopened container)
- Contains: Copper, graphite, and other nonmetallic additives
BESTOLIFE STINGER HDD WHITE
BESTOLIFE® Stinger® HDD White is an environmentally friendly non-metallic thread compound for all HDD drilling applications. It washes out of fabric and applies easily in a wide range of temperatures and conditions.
Recommended for use on all HDD drill pipe. Can be brushed on threads or applied via automated lubrication systems. This non-metallic formula is developed for low environmental impact. Stinger® HDD White is brushable down to -40°F.
- Color: Off White
- Penetration: 300-320 (ASTM D 217)
- NLGI Grade: 1
- Weight/Gallon: 10.8 pounds/gallon
- Dropping Point: ≥300°F (≥149°C)
- Flash Point: ≥325°F (≥162°C)
- Brushable To: -40°F (-40°C)
- Service Rating: 400°F (204°C)
- Shelf Life: 4 years (unopened container)
- Contains: Nonmetallic additives and corrosion inhibitors
AUNTIE C’S THREAD LUBE
Designed specifically for the demanding conditions found in directional drilling, especially during cold-weather drilling, lubricating your drilling chucks/sub-savers, or greasing threaded reamer connection points. Auntie C’s is environmentally safe, lead-free, and provides maximum protection against galling, seizing and downhole makeup.
- Premium copper thread lube designed specifically for the demands of HDD
- Provides maximum protection against galling and seizing
- Lead free, environmentally safe compound
- Contains no zinc or other materials which may be affected by elevated temperatures
- Available in 5 gallon copper
WIPERS
DRILL ROD WIPERS
These drill rod wipers are designed to keep your drill string cleaner upon removal and storage. With our wide variety of OEM wiper sizes, you will find the perfect replacement rod wiper for your next project.
- Wipers come in 2 variations:
- Solid wipers
- Dual-split wipers
SHACKLES
HDD SHACKLES
Connect the pulling grips and pullers to your swivel with a shackle.
- Built from sturdy material, these shackles connect all sizes of pulling grips and pullers
- Various sizes ranging from 7/16″ to 1″
REAMER TEETH
REPLACEMENT CARBIDE CUTTERS
High quality carbide cutter teeth to rebuild your HDD tools fast and accurately.
- Shark Tooth® style cutters
- Conical cutter teeth
- Dome cutter teeth
- Cutter teeth blocks for rebuilds
GLUE KITS
GLUE KITS
Sub saver threadlock compound available in single use or larger container
O-RINGS
O-RING REPLACEMENTS
O-Ring replacement to keep your pullers operating the way they should in harsh ground